TelescopePark Method |
Move the telescope to its park position, stop all motion (or restrict to a small safe range), and set AtPark to True.
Namespace: ASCOM.DriverAccess
Assembly: ASCOM.DriverAccess (in ASCOM.DriverAccess.dll) Version: 6.0.0.0 (6.6.9999.9999)
SyntaxExceptions| Exception | Condition |
|---|---|
| MethodNotImplementedException | If the method is not implemented and CanPark is False |
| NotConnectedException | If the device is not connected |
| DriverException | An error occurred that is not described by one of the more specific ASCOM exceptions. The device did not successfully complete the request. |
Remarks
Raises an error if there is a problem communicating with the telescope or if parking fails.
Parking should put the telescope into a state where its pointing accuracy
will not be lost if it is power-cycled (without moving it).
Some telescopes must be power-cycled before unparking.
Others may be unparked by simply calling the Unpark method.
Calling this with AtPark = True does nothing (harmless)
See Also