FocuserTemperature Property

Current ambient temperature in degrees Celsius as measured by the focuser.

Namespace: ASCOM.DriverAccess
Assembly: ASCOM.DriverAccess (in ASCOM.DriverAccess.dll) Version: 3351c4f3fa64146a7efd5b51ed4591e32a0a5484

Syntax

C++

Copy

public double Temperature { get; }

Public ReadOnly Property Temperature As Double
	Get

public:
virtual property double Temperature {
	double get () sealed;
}

Property Value

Type: Double

Implements

IFocuserV3Temperature

Exceptions

Exception	Condition
PropertyNotImplementedException	If the property is not available for this device.
NotConnectedException	If the device is not connected.
DriverException	An error occurred that is not described by one of the more specific ASCOM exceptions. The device did not successfully complete the request.

Remarks

Raises an exception if ambient temperature is not available. Commonly available on focusers with a built-in temperature compensation mode.

Clarification - October 2019

Historically no units were specified for this property. Henceforth, if applications need to process the supplied temperature, they should proceed on the basis that the units are degrees Celsius for consistency with Temperature. Conversion to other temperature units can be achieved through the ConvertUnits(Double, Units, Units) utility method.

Reference

Focuser Class

ASCOM.DriverAccess Namespace

FocuserAddLanguageSpecificTextSet("LST86EF1571_0?cpp=::|nu=.");Temperature Property

Property Value

Implements

Reference

FocuserTemperature Property